• <th id="gck1r"><video id="gck1r"><span id="gck1r"></span></video></th>

      1. <big id="gck1r"><menu id="gck1r"></menu></big>
      2. 242 Series integrated driver

        242 Series integrated driver

        General specification:

        Type

        Motor output peak current

        Input power voltage

        24204

        4A

        12V~40VDC

        24208

        8A

        12V-40VDC

        Feature:

        Miniature Integral Design
         ● Miniature size 42.3mm*42.3mm*13.5mm
         ● Fit onto motors seamlessly
         ● Die-cast aluminum enclosure, improving heat transfer and durability

        Embedded DSP Microprocessor
         ● Embedded 16-bit high-performance digital signal micro processor
         ● Simple structured, intuitive, rich instructions
         ● Intelligent, fault-tolerating, user-friend interface

        CAN2.0B Active Communication
         ● 2-wire interface
         ● 1 Mega bit/sec operation, long distance
         ● High noise immunity due to differential bus implementation

        Motor Drive Characteristics
         ● Wide supply voltage range 12 ~ 40VDC
         ● Output current 4A/8A, real-time adjustable through instruction
         ● Automatic current reduction, real-time set through instruction
         ● Full to 16th micro step resolution
         ● Dual full H-bridge with PWM constant current control

         

        Description:

        24204 and 24208 are miniature stepper motor controllers with CAN network capability. Through one CAN-RS232

        converter, user device can command multiple 240xx controllers through RS232 port using ASCII coded instructions

        with minor or no knowledge about the stepper motor driving and CAN network. Instructions are simple, intuitive and

        fault-tolerating. 242xx controller can be mounted onto 42 / 57 / 86 / 110 series stepper motors seamlessly using

        corresponding flanges. Thickness of the controller is less than 14 millimeter. Enclosure is made of die-cast aluminum

        providing a rugged durable protection and improves the heat dissipation.

         

        Specification:

        Supply Voltage

         40VDC

        Store Temperature

         -40 +125

        Working Temperature

         -20 +85

        Working under environment exceeding maximum value could damage the controller

        Electrical CharacteristicsAmbient Temperature 25

        Supply Power Voltage

         10V 40VDC

        Motor Output Current

         Max 2A/4A/8A per phase (Adjustable through instruction

        Driving Mode

         PWM constant current

        Stepping Resolution

         Full-step, half-step, quarter-step, and sixteenth-step

        Insulation Resistance

         >100MΩ

        Dielectric Strength

         0.5KV in one minute

        Communication (Ambient Temperature 25

        Protocol

         Active CAN 2.0B

        Wiring Method

         2-wire,CANH、CANL

        CAN bus drive

         • Supports 1 Mb/s operation
         • ISO-11898 standard physical layer requirements
         • Suitable for 12V and 24V systems
         • Up to 100 nodes can be connected

        Environment Requirements

        Cooling

         Free Air

        Working Environment

        Environment

         Avoid dust, oil mist and corrosive gases

        Temperature

         -20 + 85

        Humidity

         <80%RH,n condensation, no frosting

        Vibration

         3G Max

        Storage Temperature

         -40 + 125

        Size and Weight

        Size

         42.3mm x 42.3mm x 13.5mm (L*W*H)

        Weight

         0.1 kg

        Dimension (mm)

         


        Tel:+0086 25 83317372 Fax:+0086 25 83317372
        E-mail:sales@ms-motor.com ; msmotor@126.com
        MS MOTOR CO., LTD
        跑的快下载